Pulpwood Racks for the Bachmann On30 Flatcar        LASER-CUT

Based on the cars built by the Sandy River Railroad around 1900.

Easy to assemble kit features laser-cut wood parts, brass wire, plastic nut/bolt detail, laser-cut precise assembly jigs for rack assembly and deck hole drilling, b&w and full color photos.

Parts included to do either early or later strengthened version.   

Flatcar not included.

Kit # 1    $10.95 

 

When the US Postal Service got a look at the RGS's open railtruck, they threatened to revoke the mail contract. The mail had to be carried in a secure location. This is what the RGS came up with.

Easy to build.  Laser-cut wood with plastic details, and peal and stick roofing.  Removable, fits into stake pockets. Cab window frames included.   Railtruck not included.

Kit # 2    $24.95

Replace those plastic racks with a set of real wood ones.    Railtruck not included.

Easy to build kit includes laser-cut stakes, precut slats, plastic details, and full size assembly templates.

Kit # 3     $6.50

 

Laser cut wood frames with plastic glazing.

Kit # 4     $1.50

for the Bachmann On30 caboose chassis.  Easy to build.

Kit will build either version shown.     Caboose chassis not included.

Laser-cut plywood with peal and stick parts, and illustrated instructions.

Kit # 5-a    $39.95

for the Bachmann on30 caboose chassis.  Easy to build

Kit will build either version shown.     Caboose chassis not included.

Laser-cut plywood with peal and stick parts, and illustrated instructions

Kit # 5-b   $39.95

SR&RL TYPE  CABOOSE BODY

Based on the SR&RL RR's caboose #551. Fits on  the Bachmann On30 passenger car chassis.

Laser-cut plywood with peal and stick parts, strip wood, milled wood corners, brass wire. peal and stick roofing.    Passenger car chassis not included.

Includes jigs for handrail bending and ladder assembly. Fully illustrated instructions.

Kit # 6      $39.95

Based on the interior of the SR&RL's caboose # 551.

Laser-cut plywood and basswood with peal and stick window trim and interior doors. Also includes door guard planks for wall opposite cupola box.

Includes optional seat, plastic hinge detail, and new full glazing sheet for the doors.

Slides right into the caboose body.  Parts shown in green are supplied in caboose kit.

Kit # 6-a     $16.50

Later type open back cab fits on the On30 2-4-4t Forney.

Laser-cut plywood and basswood with peal and stick front plate, plastic carriage bolt head detail, plastic glazing, interior wall and side window detail. Three position roof hatch.  Easy to build.

Kit # 7     $19.95  

Based on SR&RL caboose #553.  Designed to fit on the Bachmann passenger car chassis.

Laser-cut plywood and basswood with peal and stick parts. Also includes peal and stick roofing, bass strip wood, and brass wire.   Easy to assemble.  Passenger car chassis not included.

Kit # 8     $39.95

Based on the interior of SR&RL's #553 caboose.

Same construction as our kit # 6-a.  East to build.  Slips into completed body.

Kit # 8-a     $16.50

These 3 almost identical cars were built by the Maine Central RR in 1913.  Two of the cars survived the RR.

This is our 1st correct size caboose kit, no compromises in size here.  Measured from the original 556 in Phillips, Maine.  Complete with full interior. Details match the prototype. Trucks and couplers not included.

These kits consist of laser-cut plywood and basswood with peal and stick parts.  Kits also contain plastic details including stove and brake cylinder/reservoir, brass handrails and ladders, scale looking draft gear. Trucks and couplers not included.  Will require Kadee (R) #26 or McHenry #14 couplers and On2 or On30 trucks of your choice. 

Kit # 9     $79.95      SR&RL #556  Longitudinal flooring, long platform supports, 3 panel doors.

Kit # 10   $79.95      SR&RL #557 + 558  Diagonal flooring, short platform supports, 2 panel doors.

Easy to build body with interior seats and end windows.   Kit consists of laser-cut plywood, basswood, cardstock roof, and plastic glazing.

Kit # 11    $22.50

24' caboose converted from a boxcar.  Kit is derived from 3 photos and known boxcar dimensions.

Kit consists of laser-cut 2 sided sides and ends, 'metal' roof with etched panel lines, interior framing details, sliding side doors with cast brass hardware, semi-scale draft gear which accepts #26 or McHenry #14 couplers (not included), plastic details, and brass wire.    Trucks and couplers not included.

Kit # 12   $46.95

Early Dyer built 24' boxcar with 5' 3" high door opening.

Kit consists of laser-cut 2 sided sides and ends, 'metal' roof with etched panel lines, interior framing details, sliding side doors (choice of 3 styles) with cast brass hardware, semi-scale draft gear which accepts #26 or McHenry #14 couplers (not included), plastic details, and brass wire.   

Trucks and couplers not included.

Kit # 13   $42.95

Early Dyer built 24' boxcar with 5' 3" high door opening.

Kit consists of laser-cut plywood sides and ends, 'metal' roof with etched panel lines, choice of 3 styles of side doors with cast brass hardware, semi-scale draft gear which accepts #26 or McHenry #14 couplers (not included), plastic details, and brass wire.   

Trucks and couplers not included.

Kit # 13-a   $39.95

Laser-cut plywood and basswood with peal and stick front plate, plastic carriage bolt head detail, plastic glazing, interior wall and side window detail. Three position roof hatch.  Easy to build.

(Photo shows our #706 pilot, not included in cab kit, see Detail Parts page for pilot kits.)

Kit # 14   $19.95

Laser-cut plywood and basswood with peal and stick front plate, plastic carriage bolt head detail, plastic glazing, interior wall and side window detail.  Easy to build.

(Photo shows our #706 pilot, not included in cab kit, see Detail Parts page for pilot kits.)

Kit # 14 a  $19.95

Laser-cut wood, chipboard roof, peal and stick trim and roofing, plastic details and glazing. Includes seats. Rear wall has 2 full-height freight doors.

Easy to assembly, but does require some disassembly of the railtruck to remove the cab, explained with photo in the illustrated instructions.    Railtruck not included.

Kit # 15    $28.95

Four windows on each side, plain rear wall (no freight doors).